Check the material of the vibrating screen can to distinguish whether the vibrating screen is good or bad. The 304 stainless steel vibrating screen has a smooth surface and high plasticity, toughness and mechanical strength. The poor quality vibrating screen will not be welded and will be easily oxidized, which will affect the whole quality. So, clients must choose a regular manufacturer when choose and buy.
The common conversion method for three-dimension vibrating screen mesh
First , we need to know the number of holes in the screen per square inch. The number refers to the number of holes per square inch of screen. 50 mesh means that there are 50 holes per square inch, and 500 holes are 500. The higher the mesh, the higher the hole. many. In addition to the apertures representing the screen, it is also used to indicate the particle size of the particles that can pass through the screen. The higher the number of meshes, the smaller the particle size. That is, the larger the mesh number, the larger the number of holes, the smaller the pore size, the finer the particle size of the material that can be sieved; the smaller the mesh number, the smaller the number of holes, the larger the pore size, and the larger the particle size of the material that can be sieved. Therefore, we should select the appropriate screen according to the particle size of the material to be screened to meet the screening needs. Unit conversion: 1 inch (int) = 2.54 cm (cm) = 25.4 mm (mm).